-
Main drawings for plans/walls only, no general plans (1)
-
Working drawings and building description (1)
-
Structural calculations (1)
-
Ground Floor Structure:
-
16mm x 100mm pressure impregnated bearing boards
-
45mm x 195mm floor structure beams at 600mm centres – outside framework is pressure impregnated
-
10mm damp proof membrane board supporting insulation
-
195mm mineral wool insulation
-
22mm T&G floor moisture resistant particleboard
-
Outer Walls
-
Timber profile 58mm x 145mm (cut and jacked for corners – each board is marked with a number)
-
Counter membrane & 19mm x 70mm battens
-
Steel band wind bracing BMF 25mm x 2mm
-
45mm x 145mm framework
-
145mm mineral wool insulation + plastic foil vapour control
-
Internal 12mm x 120mm PTGV timber matching wall panel or 13mm gypsum plaster board
-
Internal Bathrooms, 13mm non-organic wet room board
-
Inner walls
-
45mm x 70mm / 95mm framework
-
Mineral wool insulation
-
Internal 12mm x 120mm PTGV timber matching wall panel or 13mm gypsum plaster board
-
Internal Bathrooms, 13mm non-organic wet room board
-
First Floor Structure
-
45mm x 195mm 600mm centre floor structure
-
45mm mineral wool insulation
-
26mm x 137mm kiln dried to 8-10% flooring boards on structure beams
-
Veranda
-
45mm x 195mm 600mm centre pressure impregnated floor structure beams
-
Pressure impregnated 22mm x 95mm PAR floorboard
-
Windows
-
Triple glazed(2) windows, side hang or fixed (as plans), untreated with ventilation valves.
-
Glazed Doors
-
Triple glazed(2), untreated with ventilation valves.
-
Doors
-
External: Entrance Door 1000mm x 2000mm untreated ‘Swedor’ with Cotswold glass. Right hand hung
-
Internal: 900mm x 2000mm rustic style with lacquered door panel, untreated frame
-
Complete with all door furniture including handles & locks
-
Stairs and Balustrade
-
Pine clear lacquered with 900mm high balustrade
|
-
Roof
-
Underlay felt & 22mm T&G roof panel
-
45mm x 290mm purlins at 1200mm centre
-
60mm air ventilation and 230mm mineral wool insulation with windshield
-
Vapour control layer
-
28mm 70 secondary spacing board at 400mm centres & internal timber ceiling panel
-
Glulam Beam
-
As first floor structure with 19mm x 95mm sawn panelling under roof
-
Other
-
Bargeboard 22mm x 145mm, eaves & eave slabs, lining board, architrave, nail plates and nails
(1) These elements relate to standard specification only. Any costs associated with changes necessary because of purchaser’s variations or addition of any combination of optional extras are payable by the purchaser at time of order / deposit.
(2)Where required by UK Building Regulations, toughened security glazing to BS EN 12600 is supplied.
Purchaser’s responsibility:
-
Planning permission
-
Approval of UK Building Regulations from your local county council as applicable. (n.b. All Svenskhomes are designed to comply in principle with UK Building Regulations only so far as the delivered kit is concerned.(1) )
-
Project management & construction
-
All ground works: sewers, drainage, water/gas/electric supply
-
Foundations
-
Offloading from delivery vehicle – forklift or similar required
-
Post Delivery Care. All packs are delivered 5 side plastic wrapped on trailers. After delivery to site, packs must be stored clear of the ground on bearers in a covered area or under a tarpaulin, protected from the elements.No claims for weathering or deterioration will be entertained if these precautions are not taken.
-
Plumbing, heating & electrical installations
-
Tiling battens, roof tiles, gutters and drainpipes
-
Treatment of all external surfaces
-
Treatment of all internal surfaces (inc. Intumescent fire retardant finish if required by local UK Building Regulations)
Optional Extras
-
Additional right hand hung balcony door and triangle window replacing fixed window
-
Internal/External WallsEither PTGV timber matching wall panel or 13mm gypsum plaster board
-
Balcony (If not supplied in the kit)
-
Roof over Veranda (If not supplied in the kit)
|